User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Fluke 5200A Sub 2
DATE:                  24-Oct-97
AUTHOR:                User Contributed
REVISION:
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       15
NUMBER OF LINES:       120
CONFIGURATION:         Datron 1281
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  HEAD         {* Millivolt Range Tests *}
  1.002  JMP          2.001
  1.003  EVAL
  2.001  DISP         Remove the sense connection from the test setup.
  2.002  DISP         Change the UUT as follows:
  2.002  DISP         VOLTAGE RANGE ...................... 100 mV
  2.002  DISP         VOLTAGE dials ...................... 100.0000
  2.002  DISP         FREQUENCY RANGE .................... 1 KHz
  2.002  DISP         FREQUENCY dials .................... 1.000
  2.003  DISP         Set the UUT MODE switch to OBPR.
  2.004  IEEE         [@1281]RDG?[D5000][T0][I]
  2.005  MEM*         1000
  2.006  ACC    200   100.0000mV     100P% 10P/
  2.007  MEME
  2.008  MEMC         mV             0.048U
#!          Test Tol 0.048, Sys Tol 0.012, TUR 4.000 (>= 4.00).
  3.001  DISP         Set the UUT MODE switch to STBY.
  3.002  DISP         Change the UUT as follows:
  3.002  DISP         VOLTAGE RANGE ...................... 10 mV
  3.003  DISP         Set the UUT MODE switch to OBPR.
  3.004  IEEE         [@1281]RDG?[D5000][T0][I]
  3.005  MEM*         1000
  3.006  ACC    200   10.00000mV     100P% 10P/
  3.007  MEME
  3.008  MEMC         mV             0.012U
#!          Test Tol 0.012, Sys Tol 0.003, TUR 4.000 (>= 4.00).
  4.001  DISP         Set the UUT MODE switch to STBY.
  4.002  DISP         Change the UUT as follows:
  4.002  DISP         VOLTAGE dials ...................... 1.00000
  4.003  DISP         Set the UUT MODE switch to OBPR.
  4.004  IEEE         [@1281]RDG?[D5000][T0][I]
  4.005  MEM*         1000
  4.006  ACC    200   1.000000mV     100P% 10P/
  4.007  MEME
  4.008  MEMC         mV             0.0084U       10mVrange
#! WARNING: Test Tol 0.0084, Sys Tol 0.0021, TUR 4.000 (<  4.00).
  5.001  DISP         Set the UUT MODE switch to STBY.
  5.002  HEAD         {* Voltage Linearity Test *}
  5.003  JMP          6.001
  5.004  EVAL
  6.001  DISP         Connect the UUT SENSE HI/LO  to the Datron HI/LO inputs.
  6.002  DISP         Change the UUT as follows:
  6.002  DISP         VOLTAGE RANGE ...................... 10 V
  6.002  DISP         VOLTAGE dials ...................... 9.99999
  6.002  DISP         SENSE .............................. EXT
  6.003  ACC    20    9.999990       60P% 10P/
  6.004  IEEE         [@1281]RDG?[D5000][T0][I]
  6.005  MEME
  6.006  MEMC         V              0.0032U       1kH
#! WARNING: Test Tol 0.00032, Sys Tol 0.0008, TUR 0.400 (<  4.00).
  7.001  DISP         Change the UUT as follows:
  7.001  DISP         VOLTAGE dials ...................... 8.88888
  7.002  ACC    20    8.888880       60P% 10P/
  7.003  IEEE         [@1281]RDG?[D5000][T0][I]
  7.004  MEME
  7.005  MEMC         V              0.00293U      1kH
#! WARNING: Test Tol 0.00032, Sys Tol 0.00073333, TUR 0.436 (<  4.00).
  8.001  DISP         Change the UUT as follows:
  8.001  DISP         VOLTAGE dials ...................... 7.77777
  8.002  ACC    20    7.777770       60P% 10P/
  8.003  IEEE         [@1281]RDG?[D5000][T0][I]
  8.004  MEME
  8.005  MEMC         V              0.00267U      1kH
#! WARNING: Test Tol 0.00032, Sys Tol 0.00066667, TUR 0.480 (<  4.00).
  9.001  DISP         Change the UUT as follows:
  9.001  DISP         VOLTAGE dials ...................... 6.66666
  9.002  ACC    20    6.666660       60P% 10P/
  9.003  IEEE         [@1281]RDG?[D5000][T0][I]
  9.004  MEME
  9.005  MEMC         V              0.0024U       1kH
#! WARNING: Test Tol 0.00032, Sys Tol 0.0006, TUR 0.533 (<  4.00).
 10.001  DISP         Change the UUT as follows:
 10.001  DISP         VOLTAGE dials ...................... 5.55555
 10.002  ACC    20    5.555550       60P% 10P/
 10.003  IEEE         [@1281]RDG?[D5000][T0][I]
 10.004  MEME
 10.005  MEMC         V              0.00213U      1kH
#! WARNING: Test Tol 0.00032, Sys Tol 0.00053333, TUR 0.600 (<  4.00).
 11.001  DISP         Change the UUT as follows:
 11.001  DISP         VOLTAGE dials ...................... 4.44444
 11.002  ACC    20    4.444440       60P% 10P/
 11.003  IEEE         [@1281]RDG?[D5000][T0][I]
 11.004  MEME
 11.005  MEMC         V              0.00187U      1kH
#! WARNING: Test Tol 0.00032, Sys Tol 0.00046667, TUR 0.686 (<  4.00).
 12.001  DISP         Change the UUT as follows:
 12.001  DISP         VOLTAGE dials ...................... 3.33333
 12.002  ACC    20    3.333330       60P% 10P/
 12.003  IEEE         [@1281]RDG?[D5000][T0][I]
 12.004  MEME
 12.005  MEMC         V              0.0016U       1kH
#! WARNING: Test Tol 0.00032, Sys Tol 0.0004, TUR 0.800 (<  4.00).
 13.001  DISP         Change the UUT as follows:
 13.001  DISP         VOLTAGE dials ...................... 2.22222
 13.002  ACC    20    2.222220       60P% 10P/
 13.003  IEEE         [@1281]RDG?[D5000][T0][I]
 13.004  MEME
 13.005  MEMC         V              0.00133U      1kH
#! WARNING: Test Tol 0.00032, Sys Tol 0.00033333, TUR 0.960 (<  4.00).
 14.001  DISP         Change the UUT as follows:
 14.001  DISP         VOLTAGE dials ...................... 1.11111
 14.002  ACC    2     1.111110       60P% 10P/
 14.003  IEEE         [@1281]RDG?[D5000][T0][I]
 14.004  MEME
 14.005  MEMC         V              0.00035U      1kH
#! WARNING: Test Tol 0.00032, Sys Tol 8.6667e-005, TUR 3.692 (<  4.00).
 15.001  DISP         Set the UUT MODE switch to STBY.
 15.002  DISP         Remove all connections.